| APT-4-P OILY WATER SEPARATOR SPECIFICATIONS | | Rated flow | 4 gpm (5800 gpd) | | Principle of operation | Oily water separation to 15 ppm via enhanced gravity and large coalescer bed. | | Capacity | Oils with up to .96 specific gravity, 0 to 100% concentration. Temperature 33 to 120F degrees ambient. | | Suction | 25 ft. maximum vertical suction lift, less than 15 ft recommended. | | Discharge pressure | 15 psi at 4 gpm, 50 psi maximum at 2 gpm. | | Oil | 30 ft. maximum vertical discharge, 3 gal. approximate per batch. | | Tank construction | PVC material, continuously welded. | | Internals | Single, large coalescer bed, polypropylene beads. | | Electrical requirement | 115 VAC, 60 Hz, 1 phase. 15 amp protected circuit reqd. | | Pump | Model 332 progressive cavity pump. | | Motor | 1/2 hp, 1750 rpm, TEFC | | Valves | Bronze solenoid, gate, pressure relief (30 psi) | | Pipe | Brass with NPT threads. | | Controls | JIC enclosure, dielectric interface sensor with 2 tip sensitive probes. | | Connection sizes | | Inlet | 1 1/4 NPT | | Backflush recirculate | 3/4 NPT | | Oil Discharge | 3/4 NPT | | Blackflush inlet | 3/4 NPT | | Blackflush water | 30 psi maximum | | | Overall dimensions | Less than 27" x 27" x 40" tall | | Weight | | Dry | 270 lbs. | | Wet | 360 lbs. | |
|
